APOSTC Firearms Practice Test

These questions are part of the practice quiz. Start practicing

• Which option correctly describes how to operate the flashlight safely on a firearm?
• Why is it important to practice trigger control and avoid jerking the trigger?
• When a firearm is laid down on its side what position does the firearm need to be presented in?
• Who bears the responsibility to know your department firearm policy and procedures?
• Which statement describes sight alignment and sight picture?
• Can a participant retry after failing the first attempt, and if so, under what condition?
• Which statement best describes the general difference between FMJ and Jacketed Hollow Point ammunition and typical law enforcement usage?
• If a pistol cannot unload an empty fired cartridge what part might be not working correctly?
• When shooting a target past 15 yards what firearm is recommended?
• What are the standard home storage requirements for lawfully owned firearms?
• What is a clearance check, and when should it be performed?
• Which of the following lists the parts of a rifle cartridge?
• What is the primary purpose of firearm safety rules in law enforcement training?
• Which feature on a cartridge base indicates the manufacturer and caliber?
• It is legal to store firearms within reach of 18-year-olds and under children. True or False?
• When breaching a door that is locked and or approaching a close but wide spread range Target what's the weapon of choice?
• Which cartridge component is struck by the firing pin to ignite the primer?
• During APOSTC qualification, how many attempts are allowed to achieve a passing score?
• How often should an officer clean his/her firearm?
• Which of the following best describes the timing for trigger discipline in compliance with gun safety rules?
• What practice is recommended to improve pistol accuracy?
• Which statement about reloads is true?
• What best describes range safety practice with respect to muzzle discipline during handling?
• What is the required carriage for a cadet's firearm at the academy?
• When should a duty handgun be inspected according to policy?
• Safety is the primary responsibility of whom?
• What qualifies as an imminent threat justifying deadly force?
• What is the one thing that you do not want to do while shooting a pistol which will greatly affect your bullet?
• What is the third gun handling rule?
• Which statement best contrasts deadly force with less-lethal options?
• If you are handed a firearm, should you always check its status of being hot and ready, even if someone else just cleared the weapon?
• What is the purpose of a slide lock or slide stop, and when should it be used?
• Which safety rule states you must identify the target and what’s beyond before shooting?
• What is the recommended handgun grip for control and recoil management in a duty pistol?
• Which pistol malfunction is commonly caused by a dirty magazine or weak feed?
• What is a good idea to have when using flashlights?
• How should ammunition be stored at the range to prevent accidental exposure?
• How should you handle a gun with a misloaded magazine?
• How should you assess backstop and threat beyond the target area?
• Which finger must never be used to activate a flashlight mounted on a firearm?
• To qualify for APOSTC firearm what must be completed and passed score of 70 or more?
• What constitutes a proper holster draw for duty use?
• Decisional shooting is determined by which elements?
• Which of the following is an example of concealment?
• What is the part of the stock located under the barrel called?
• Which statement best describes a tactical reload?
• What is the policy regarding carrying a firearm while impaired?
• What does a misfire or delay indicate?
• Why is regular firearm maintenance critical for safety and reliability?
• Which statement correctly differentiates cover from concealment?
• Which statement about safety rules is true?
• Which part of a pistol holds the cartridges?
• A firearm that can only shoot one cartridge at a time is?
• Which of the following lists represents the six basic fundamentals of marksmanship?
• Which malfunction is described as a failure to eject (stuck case)?
• In a magazine, which component pushes cartridges upward toward the action?
• Can a person try to qualify if they fail their first attempt at APOSTC?
• During a malfunction, who is responsible for addressing the issue?
• To purchase a firearm, do you need a valid FSC?
• Which statement about the six fundamentals is true?
• In the PowPow v Margate case, who was shot dead?
• Which malfunction is described as a double-feed (two rounds)?
• In side alignment, which statement accurately describes the relationship between the front and rear sights?
• How should a handgun be transported in a vehicle?
• Which statement correctly distinguishes sight alignment from sight picture?
• What should you confirm before firing regarding the area beyond the target?
• Which feature is characteristic of Glock-style pistols?
• Which weapon is designed to fire Slugs and shot rather than bullets?
• During a draw from concealment, which practice helps prevent negligent discharge?
• Under what circumstances may an officer draw and point a firearm at a suspect?
• What do you do when you hear the command cease fire?
• What is concealment?
• What information is typically included in a post-incident firearm report?
• Define a Failure to Feed (FTF) malfunction and the immediate corrective actions.
• How long does it take for eyes to begin adapting to dim light, and how long to reach full night vision?
• Which practice best adheres to the fundamental safety rule regarding trigger finger?
• Why is finger placement on the trigger critical when presenting a firearm?
• What is the number one gun handling rule?
• Which action is NOT part of the standard tap-rack-bang drill?
• Which sequence best describes the law enforcement use-of-force continuum?
• In a clearance check, which sequence helps verify the firearm is unloaded?
• Which actions define safe firearm handling around colleagues during training?
• What part of the gun hits the primer on a cartridge to ignite the powder?
• What is the recommended grip pressure distribution on a pistol?
• Which malfunction corresponds to a stovepipe, where the ejecting shell lip catches and the case is ejected partway?
• From a safety policy perspective, what should be considered regarding concealment and visibility?
• Which component ignites the gunpowder inside a cartridge?
• During night shooting, which gets holstered first the gun or flashlight?
• Which elements contribute to an effective shooting stance and stability?
• What is the correct sequence for safely clearing a weapon after use or following suspect contact?
• What is the general policy approach to open vs. concealed carry from a range safety and agency perspective?
• Which part of a firearm serves as the bore through which the projectile travels?
• Firearm instruction pyramid consists of which three levels?
• When carrying a pistol with a loaded magazine does the pistol need to be Hot with a cartridge loaded?
• Why is it important to practice reloads and malfunction drills under stress?
• In transition zones, what does the color orange indicate?
• What is the minimum passing score for APOSTC firearm Qualification?
• Which weapon is preferred when breaching a door at close range with a potential wide spread threat?
• Which statement best describes a stovepipe malfunction?
• What is the primary purpose of range commands in a training environment?
• Who is responsible for the bullet that is fired from the firearm?
• During dynamic range movement, which rule is most important for maintaining safety?
• Which of the following is NOT a component of the decisional shooting elements?
• When should less-lethal options be considered in the use-of-force continuum?
• During safe clearing of a weapon, what is the step that follows removing the magazine?
• Which part of a cartridge is propelled from the firearm?
• While shooting at night what should you never do with a flashlight?
• What is the minimum qualifying score for the APOSTC firearm qualification?
• How do scanning and situational awareness contribute to safe firearms use?
• Which of the following lists the three common gun malfunctions?
• What is the safe direction and why is it important?
• Which device initiates the firing process on a firearm when pressed?
• Which description best defines trigger manipulation?
• Which of the following is NOT a recommended step when clearing a firearm after use?
• What is the fourth gun handling rule?
• How does target identification impact use-of-force decisions?
• Who is responsible for the bullet fired from the firearm?
• What is the line of fire in firearms safety?
• What’s the difference in a rifle and a shotgun?
• In what order should you perform a magazine change during a combat reload?
• In the event of a misfire, what is the correct action to use?
• Which of the following is not part of a shotgun shell?
• During a clearance check, which action is inappropriate?
• What are the two stances?
• In an active shooter scenario, what is the recommended sequence of actions?
• When aiming a pistol with no red dot, what should the shooter focus on?
• After firing all rounds of your magazine, what is the next step?
• In a semi-automatic pistol, what is the primary function of the extractor?
• What type of sight do handgun shooters use?
• Which fundamental is directly associated with breath control?
• What is the tube-like part through which bullets travel in a firearm?
• A firearm that can hold multiple cartridges and fire them each time the trigger is pulled is an?
• Does every firearm have a serial number?
• Which term describes a firearm that can automatically cycle the next round after each shot?
• Why should ammunition be stored away from heat, open flames, and moisture?
• Which component is used on the pistol slide to align the rear sight post with the front sight post for aiming?
• Which of the following is a shotgun slug?
• Whose responsibility is it to know your department firearm policy and procedures?
• Which statement best describes proper trigger control?
• What part of the pistol is used on the slide to align the front sight post to aim at a target?
• If an officer is APOSTC certified, can they carry a pistol without a permit in all 50 states?
• What are the different types of gun reloads?
• What is the Tap-Rack-Bang drill and when should it be used?
• What is the combat triad composed of?
• A Glock-style pistol is known as what type of firearm?
• Follow through is defined as what?
• Define the duty to intervene as it relates to use of force.
• Which element is commonly documented in a post-incident firearm report?
• While at the academy a cadet carrying a firearm is to?
• What practice reduces surprise and improves safety during firearm handling?
• Which statement differentiates cover from concealment and provides a correct example?
• The grip on a pistol needs to be what type of pressure?
• Which is an example of cover?
• In transition zones, which color represents panic mode?
• What is required annually to maintain APOSTC certification?
• Which option best describes a recommended practice when using flashlights?
• Which description matches a single-shot pistol?
• What is cover?
• Define a Failure to Eject (FTE) and how it is addressed.
• Which sequence correctly describes a proper draw stroke from concealment?
• What does muzzle discipline require?
• What is the purpose of a range drill such as 'repeat draw and fire'?
• If one fails the firearms qualification twice when can he or she return?
• Which statement about standard home storage is NOT correct?
• The first cartridge loaded into a magazine presses against which component?
• When using a pistol for duty which ammo is the best to be used?
• Which item is NOT part of the six basic fundamentals?
• Which statement best describes the firing mechanism of a Glock-style pistol?
• What is a tool used to shoot projectile by burning gunpowder?
• Smokeless powders can be used safely in muzzle loading firearms?
• When using a Red Dot sight on a pistol, where should you focus to aim?
• To improve accuracy the simple procedure to follow is?
• In the sequence of a combat reload, what should you do after replacing the spent magazine?
• Define negligent discharge and how it differs from accidental discharge or misfire.
• How many extra magazines can you carry?
• What is the second gun handling rule?
• What does regular firearm maintenance prevent?
• What are FMJ and Jacketed Hollow Point ammunition, and which is commonly used by law enforcement to reduce over-penetration?
• Which statement best defines deadly force?
• What is the part of the pistol called where the bullet leaves the end of the barrel?
• What part of the cartridge does the firing pin strike to ignite the powder?
• Where do you need to place the yoke of your hand on the back side of a pistol?
• Does full choke in a shotgun give the best shot spread?
• In transition zone color codes, which color indicates an armed encounter requiring drawing a weapon?
• True or false: 90% of all malfunctions are caused by shooter error.
• How does ammunition feeding differ between semi-automatic pistols and revolvers?
• Four factors are necessary to cause injury with a firearm. Which statement lists them correctly?
• What is the top of the pistol called which holds the barrel, front sights, back sights and firing mechanism that racks backwards and forwards on a pistol?
• What is the correct action if a gun discharges accidentally while holstering?
• In the event of a malfunction during operation of a firearm, who is responsible for addressing the issue?
• What is a firing line and how does it relate to range safety?
• In transition zones, which color code corresponds to a specific alert to a possible danger?
• Which parts are involved in muzzle orientation and why is guarding the trigger essential?